|Dimensions||18 × 78 × 18 cm|
|Features and Benefits||CARDONE has extensive experience in remanufacturing CV Drive Axles – we’ve spent over three decades re-engineering materials and processes to arrive at a superior, longer-lasting product. Our proprietary pneumatic clamping machines create a perfect seal between the boot and housing, creating a water-tight seal. The perfect geometry of the ball groove is maintained to allow for proper grease flow, significantly increasing longevity. Additionally, all CV Drive Axle shafts are individually verified for straightness, resulting in vibration-free performance at all speeds.>|
|Weight - Each (Gross Pounds)||36>|
|Height - Each (Inch)||6.375>|
|Length - Each (Inch)||29.5>|
|Width - Each (Inch)||6.375>|
|Minimum Order Quantity||1>|
|Package Contents||Complete Axle>|
|Output Shaft Spline Count||33>|
|Spindle Nut Included||No>|
|ABS Ring Included||No>|
|Input Shaft Connection Style||Bolt-On>|
|Output Shaft Connection Style||Spline>|
|Input Shaft Bolt Count||6>|
|Short Description||CV Axle Assembly>|
|FAQs||NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one.>|
|FAQs||Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications.>|
|FAQs||Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint.>|
|Life Cycle Status||Available to Order>|
|FAQs||Is it OK to use an impact hammer to install the retaining nut?>|
|Life Cycle Status Description||Available to Order - Part is released to customers for ordering.>|
|FAQs||I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do?>|
|Item Level GTIN||00082617474474>|
|FAQs||I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?>|
|Quantity Per Application||1>|
|FAQs||I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this?>|
|FAQs||Can I let the CV Drive Axles hang while I am working on the car?>|
|FAQs||Are the CV Drive Axle shafts balanced at the factory?>|
|FAQs||Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly.>|
|FAQs||When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.>|
|FAQs||When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking.>|
|FAQs||When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?>|
|FAQs||When I replace the CV drive axles, should I reuse the old seals?>|
|FAQs||When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?>|
|FAQs||The wheels wobble when I make a turn. What's the problem?>|
|FAQs||The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time.>|
|FAQs||The old CV Drive Axle has a locking style (prevailing torque) nut. Should I reuse it?>|
|FAQs||The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint.>|
|FAQs||The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up.>|
|FAQs||The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.>|
|FAQs||The most likely cause is a broken bearing cage due to excessive torque load. This is typically an outboard joint problem.>|
|FAQs||The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it?>|
|FAQs||Shafts are inspected 100% for run out to prevent vibrations. Only shafts that meet the specifications for run out are utilized in the remanufacturing of a CV Drive Axle assembly.>|
|Features and Benefits||Threads are chased to ensure proper fit of the new retaining nut supplied with each CV Drive axle.>|
|Features and Benefits||Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles.>|
|Features and Benefits||Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.>|
|Features and Benefits||Neoprene boots ensure excellent environmental stress resistance, which eliminates cracking - a leading cause of boot failure.>|
|Features and Benefits||High-tech grinding machines maintain the original design of the outer housing, race and cage to guarantee reliable performance.>|
|Features and Benefits||High-quality grease withstands high-temperature and pressure extremes, which extends joint life.>|
|Features and Benefits||CV Drive Axle shafts are inspected for run out to prevent vibration.>|
|Features and Benefits||CV Drive Axle is measured after assembly to ensure proper fit.>|
|Features and Benefits||Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.>|
|Features and Benefits||As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.>|
|Compressed Length (in)||24.75>|
- CADILLAC ELDORADO 78-67 (All) - FRONT LEFT
- CADILLAC ELDORADO 78-67 (All) - FRONT RIGHT
- OLDSMOBILE TORONADO 78-67 (All) - FRONT LEFT
- OLDSMOBILE TORONADO 78-67 (All) - FRONT RIGHT
- All American Auto Parts (AAAP) makes every effort to ensure that products stocked are of a high quality from reputable suppliers.
- Customers may have rights under the Australian Consumer Law as prescribed by the Competition and Consumer Act 2010 (Cth) in relation to products purchased from AAAP.
- Products may be covered by manufacturers’ warranties in certain circumstances.
- Please see our Terms of Trade for further details.
If you feel you may have a warranty claim please fill in this warranty form and one of our team members will contact you immediately during business hours.
For a warranty claim to be considered the part or parts must be:
- Faulty, arising from defective materials and/or workmanship
- Not fit for its original manufactured purpose
- Purchased from AAAP with proof of purchase supplied
- Claimed under warranty within the designated warranty period for the specific manufacturer.
Full details can be read in our Terms and Conditions.
Total responsibility for the fitment of correct parts remains at all times with the purchaser. It is incumbent upon the fitter of the parts to ensure that the parts purchased are correct for the application. AAAP will accept no responsibility whatsoever for the fitment of incorrect parts.
Any and all warranty will be voided if a part or parts are fitted in an incorrect or unprofessional manner.
AAAP will not be liable for any labour costs involved in the fitting of replacement parts that are subject to warranty claim.
We want you to receive your purchase as cheaply and quickly as possible. We use a variety of couriers, freight companies and Australia Post to send our carefully packed despatches to your Australian address.
There are a few guidelines to shipping, with a few unavoidable exceptions:
COST OF SHIPPING:
- Up to $100, delivered within Australia via standard shipping for a flat rate of $10.
- Over $100, delivered within Australia via standard shipping FREE OF CHARGE, with a few unavoidable exceptions.
Unfortunately freight companies have surcharges for heavy and/or bulky items and for consignments to remote areas or international destinations.
If your purchase:
- Weighs over 5 kg and/or is longer than 100cm a surcharge of $10 must apply.
- Is being sent to a remote location a surcharge of $15 must apply.
- Is being sent internationally, eParcel calculated shipping rates will need to apply to all orders.
Currently we ship online orders to New Zealand. If you are from another country and would like to purchase one of our many products, please contact us via email and will do our very best to arrange international shipping for you.
METHOD OF DELIVERY:
The size, weight and destination of your order will determine which freight company will be needed to deliver to you. Your consignment will be sent via Australia Post, Startrack, TNT, Toll or Couriers Please.
Your order will be despatch the same day for all orders received by 12 noon, Monday to Friday. Orders received outside business hours or after 12 noon, will be despatched the next business day.
Expected Delivery Times
|Destination:||Approximate Delivery Time (business days):|
|Melbourne or Metro areas within Victoria||2-4 days|
|Country Victoria||3-5 days|
|Sydney, Canberra, Adelaide, Brisbane||2-5 days|
|Perth, Darwin||5-10 days|
Once your order is completed, you will receive a confirmation email with the tracking number, to enable you to follow your order.
Your order can only be delivered to a post office box if it small enough to fit into an Australia Post bag. At checkout the weight of your total order will be calculated for you and if a post office box is not possible for delivery, a different shipping address will need to be supplied.
Once an online order is placed the delivery address for shipping cannot be altered.
All American Auto Parts (AAAP) is committed to delivering quality products and services to our valued customers. If you need to return your online purchase please follow the steps below.
CHANGE YOUR MIND OR MAKE AN INCORRECT CHOICE…
Return Eligibility – To return you purchase the part/s must:
- Be returned within 30 days of purchase, as per invoice date.
- Include the original invoice
- Be in their original and undamaged packaging
- Be in their original unused condition
- Have not been used or installed
- Not be a specially ordered part, not usually stocked
Please complete this returns request form. One of our team will contact you immediately during business hours upon receipt of the returns request to facilitate your return.
Your item may be returned for a refund, exchange or credit, minus the original shipping costs.
Shipping on returns:
Postage costs for returns not covered under Warranty are the responsibility of the purchaser.
NOT WHAT YOU ORDERED OR DAMAGED IN TRANSIT…
Every order despatched by AAAP is doubled checked for accuracy and packed with care. If your despatch was one of the very rare cases of being either incorrectly picked or damaged in transit please contact us, using this contact form. One of our team members will contact you immediately during business hours.
For despatches with incorrect parts, we will ensure the correct parts are despatched to you as soon as possible. Return of original parts will be arranged by AAAP.
For despatches damaged in transit, photographs of the damaged parts will need to be supplied to facilitate the replacement process.
All American Auto Parts only stocks and sells quality products to our valued customers and we warranty all our products for manufacturing defects.
Please see our Warranty information for more details.